Glossary entry (derived from question below)
German term or phrase:
m ahd
English translation:
meter absolute hole depth
Added to glossary by
Coqueiro
Oct 26, 2011 08:55
12 yrs ago
1 viewer *
German term
m ahd
German to English
Science
Geology
wells/ oil drilling/sands
The following text is taken from a graph of potential and resistance for Bentheim sandstone. I am only looking or m ahd though have included other context in case it is needed. Thanks!
TOWC @ 895 m ahd
Bohrung: H1
Bentheimer Sandstein
Teufe in m
Massstab 1:200
Widerstand
Oberer Sand
Unterer Sand
Tonmittel
TOWC @ 895 m ahd
Bohrung: H1
Bentheimer Sandstein
Teufe in m
Massstab 1:200
Widerstand
Oberer Sand
Unterer Sand
Tonmittel
Proposed translations
(English)
3 +2 | m absulote hole depth | Coqueiro |
3 +1 | m AHD | Lynda Hepburn |
Change log
Oct 27, 2011 12:27: Coqueiro changed "Edited KOG entry" from "<a href="/profile/1457800">bbbb bbbb (X)'s</a> old entry - "m ahd"" to ""m absulote hole depth""
Proposed translations
+2
47 mins
Selected
m absulote hole depth
due to deviations from the vertical there is nearly always a difference between true vertical depth (TVD) and absulote hole depth. This COULD be an explanation, although to me "ahd" is known as the abbreviation for the 'azimuth of hole deviation' given in degrees.
http://pl-hi.de/diplomarbeit/dipl.html
http://www.makinhole.com/hole_dev_logs.htm
The paper recently linked by Kim Metzger shows THD and AHD side by side (p. 17)
http://www.ie-leipzig.com/IE/Veranstaltungen/Geothermie/Sper...
--------------------------------------------------
Note added at 1 Tag5 Stunden (2011-10-27 14:41:24 GMT) Post-grading
--------------------------------------------------
Danke & viel Erfolg!
http://pl-hi.de/diplomarbeit/dipl.html
http://www.makinhole.com/hole_dev_logs.htm
The paper recently linked by Kim Metzger shows THD and AHD side by side (p. 17)
http://www.ie-leipzig.com/IE/Veranstaltungen/Geothermie/Sper...
--------------------------------------------------
Note added at 1 Tag5 Stunden (2011-10-27 14:41:24 GMT) Post-grading
--------------------------------------------------
Danke & viel Erfolg!
Peer comment(s):
agree |
Lynda Hepburn
: It seems that you are on a much better track with this than I was.
14 mins
|
Thank you, Lynda!
|
|
agree |
Dr Lofthouse
1 hr
|
Thanks!
|
4 KudoZ points awarded for this answer.
Comment: "Thank you! I will keep both suggestions in this entry in mind (absolute hole depth and azimuth of hole deviation) for this project. "
+1
20 mins
m AHD
I have found AHD as Australian Height Datum - does your text refer to Australia? Your abbreviation would then refer to 895 metres Australian Height Datum.
For example see: http://www.goldcoast.qld.gov.au/t_standard2.aspx?pid=4854
"The outcome of a flood search is the Designated Flood Level, which is reported in metres AHD (Australian Height Datum), the nationally adopted datum or standard to which all elevation for mapping is to be referred. "
--------------------------------------------------
Note added at 1 hr (2011-10-26 09:58:16 GMT)
--------------------------------------------------
Having read Coqueiro's answer I think I am on the wrong track with this one - so please ignore!
For example see: http://www.goldcoast.qld.gov.au/t_standard2.aspx?pid=4854
"The outcome of a flood search is the Designated Flood Level, which is reported in metres AHD (Australian Height Datum), the nationally adopted datum or standard to which all elevation for mapping is to be referred. "
--------------------------------------------------
Note added at 1 hr (2011-10-26 09:58:16 GMT)
--------------------------------------------------
Having read Coqueiro's answer I think I am on the wrong track with this one - so please ignore!
Discussion