Glossary entry (derived from question below)
Spanish term or phrase:
aire de barrido a perforación and/or aire de barrido
English translation:
scavenging air when/for drilling and/or scavenging air
- The asker opted for community grading. The question was closed on 2012-01-23 21:54:08 based on peer agreement (or, if there were too few peer comments, asker preference.)
Jan 20, 2012 06:49
12 yrs ago
2 viewers *
Spanish term
Spain
aire de barrido a perforación and/or aire de barrido
Spanish to English
Tech/Engineering
Construction / Civil Engineering
Drilling Maintenance Guidlines
e.g. 1
Sin aire de barrido hacia la broca, revisar control neumático por fugas o solturas (aire o aceite
e.g. 2
Compresor Aire de Barrido
e.g. 3
Control de aire de Barrido
e.g. 4
Verificar presión en aire de barrido a perforación mediante lectura de manómetro en tablero de control aire (BACS
Sin aire de barrido hacia la broca, revisar control neumático por fugas o solturas (aire o aceite
e.g. 2
Compresor Aire de Barrido
e.g. 3
Control de aire de Barrido
e.g. 4
Verificar presión en aire de barrido a perforación mediante lectura de manómetro en tablero de control aire (BACS
Proposed translations
(English)
| 3 +2 | scavenging air when/for drilling and/or scavenging air |
Richard Hill
|
Proposed translations
+2
21 mins
Selected
scavenging air when/for drilling and/or scavenging air
"Scavenging air compressor"
The part I'm unsure about is "a perforación", but these links may help.
The engine is a spark-ignited, loop-scavenged, two-cycle gas engine, rated 3500 hp at 600 rpm. It is built with engine-driven scavenging air compressor and attached engine accessories in addition to generator applications, it can be direct connected to standard speed increasers or reduction gears, and will drive either pumps or centrifugal compressors.
http://shopswarf.orconhosting.net.nz/gm16358.html
aire de barrido - scavenging air
http://es.scribd.com/doc/55335251/Mecanica-Del-Automovil-e
The cross-over section is ported to receive pressurized air from above and transfer it into the down-the-holehammer subassembly 324 for operating the hammer subassembly and for supplying scavenging air to the bit head.
http://www.patentgenius.com/patent/5186266.html
The part I'm unsure about is "a perforación", but these links may help.
The engine is a spark-ignited, loop-scavenged, two-cycle gas engine, rated 3500 hp at 600 rpm. It is built with engine-driven scavenging air compressor and attached engine accessories in addition to generator applications, it can be direct connected to standard speed increasers or reduction gears, and will drive either pumps or centrifugal compressors.
http://shopswarf.orconhosting.net.nz/gm16358.html
aire de barrido - scavenging air
http://es.scribd.com/doc/55335251/Mecanica-Del-Automovil-e
The cross-over section is ported to receive pressurized air from above and transfer it into the down-the-holehammer subassembly 324 for operating the hammer subassembly and for supplying scavenging air to the bit head.
http://www.patentgenius.com/patent/5186266.html
4 KudoZ points awarded for this answer.
Comment: "Thank you very much for this and the links. It clears up many doubts..."
Something went wrong...